What Saab 9-3 Key Replacement Is Your Next Big Obsession?
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of unique steps to add an additional ignition key. This requires a handheld computer, called Tech-2 which is to be used by the dealer. A new key and transponder have to be purchased and programmed to the car.
Make sure to rotate your keys in order to prevent one from wearing out more than another. This will help keep your keys in perfect condition.
Replacement Case
Contrary to the classic Saab keys of old keys, the latest keys have electronic components which makes it difficult to make a copy. This has made stealing car keys considerably more difficult than it was years ago. However, it has also made the replacement of lost keys a more expensive endeavor.
Saab 9-3 owners should have two keys that work. If one is lost it costs a lot to replace it in the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers will typically charge $100-$200 to complete this.
There are some ways around these high cost. Some parts providers will look up the code on an old key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade for just a fraction of dealer cost. The key, however, must be the same as the original one in order to function in your vehicle.
You can also change the case yourself by following these steps. You will need a flathead screwdriver along with some patience. With the screwdriver you can pull off the plastic and then remove the emergency key. After the case is open take the electronics out and place them into your new case. Insert the correct key and badge into the case.
saab keys replacement for the Saab 9-3 is a cheap component that can be replaced easily and quickly. This YouTube DIY video Cyclone Cyd, a user on YouTube, explains how to replace the battery for the remote key fob in just four steps. This guide should work with any modern saab-type key fob, although the process might differ slightly.
The first step is to locate the button that will release the backup key on the fob. This button is usually on the back of your fob, close to the Saab Logo. Next take a flathead screwdriver into the small hole of this button. This should be enough to let the fob case open in order to change the battery.
Once you have installed the batteries CR1632, you can put back together the remote key fob. You can then program it into your car. The whole process should not exceed an hour. It is a simple process that does not require any special equipment.
The process is more complex if you lose your key, but it's possible. The dealer needs to first determine the VIN of the vehicle and order an alternative TWICE module, as well as a key blade with the correct unique code. Then, they'll need to cut the replacement key and then program it using the latest software tool known as MDI.
Replacement Key Fob
The key fob has a battery that is used to lock and unlock your car. The batteries are able to last for and eventually go out of service. This is a frequent issue that affects all cars. The good thing is that you can replace the battery in most key fobs, and not have to replace the entire case. You can purchase fobs replacements on Amazon that have all the electronics already installed, so you'll be able to just pop open the case and replace the batteries in the original case. It is important to remember that you'll need to take out the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot found in the middle of the case. The screwdriver should be moved around the case, and it will split open, making it easy to remove.
When you are ready to replace the keys, ensure you have a spare as this can reduce the total cost by a substantial amount. If you have a spare you can ask the dealer to cut the new key and program it to your car, which is cheaper than replacing the entire key fob.
If you don't have a spare, it is possible to add a second key to your car, however this requires a lot research and effort. It costs around a hundred dollars to get a second car key. The computer of the car also needs to be programmed. Professionals can do this however, it's a costly option.
Replacement Ignition
As opposed to earlier Saab vehicles, the latest SAAB 9-3 models are equipped with an advanced alarm system that is built on a key code. If you lose your only key, it may be costly to get another one because the car must have a specific computer installed and also be programmed to accept a brand new key. Dealers can even charge hundreds of dollars to program a new key when they are not able to complete the task.
Dealers will charge you a premium to replace your car's computer (also called the CIM or SAAB twice) If you lose your sole working key. We can reprogramme the existing EEPROM inside your car's computer to be ready for an extra key. This will save you more than 50% of what you would spend at the dealer.
If you've owned a car like the SAAB 9-3 for a long time, you know that the ignition keys aren't very durable. They can get extremely sticky, and the buttons are known to be ripped off from time to time, so you should consider replacing your ignition key if it isn't working as it should. The good news is that replacing the ignition key isn't as complicated as it sounds and can be done in a short time using the right tools.